ZJR-250/350 Vacuum Emulsifyi ng Mixer

Description: The materials are heated and mixed in water pot and oil pot to be fully reacted,Sucked into emulsifying pot by vacuum pump,the material are stirred by both the center blade and side scraper.which works on the inner surface of pot keeping stirring material from being stuck onto the wall.In the process of blade-stirring.the materials are sent to the cut-off mixing unit where they are again cut off broken and stirred by the strong interaction between running cutting wheel and cutting sheath ,The materials are finally crushed in to small pellets of 200mm~2um,Besides,beacuse of the vacuum in emulsifying pot,the bubbles generated during stirring and mixing process are sucked out from material.
In the process of production for high viscosity emulsion such as oil.ointment etc, the pellet diameter and bubble entrance into the liquid during stirring seem to be the most severe problem.Big pellets will cause emulsion unstable and lack in lustre.The entrance of air will make the emulsion rich in bubble,easy to be oxidized and germ polluted,resulting in rough appearance,to solve these problems our company has developed ZJP vacuum emulsifying mixers in series.Featured with different mixing&stirring modes such as cut off mixing,center-blade stirring,side-scrapper stirring ,etc, the machine offers a most reasonable stirring function,Besides no air entrance happens in vacuum throught the process of production.Thus products of good quality is ensured.

Composition:
The ZJR Vacuum Emulsifying Mixer is composed of emulsifying pot,elevating pot-cover-turn-over pot ,material ex-circulating system water pot,oil pot.vacuum unit heat&temp,control unit,cooling parts pipes electrical control system etc.

Features:
The pot cover and the stirring system takes in the form of auto-move-up-and-down,The material in water pot and oil pot is sucked into emulsifying pot in vacuum bu transmission pipes.The emulsifying pot is designed to be tilted over in case to dump products.The material can be heated by electrical heater with help of heat-conductive medium it can also heated bygasi,The heat temp can be set and automatically controlled.Material cooling is available.It is easy to operate.There is temperature-keeping sheet between inner and out sheath different stirring modes can be used simultaneously or individually.All the processes of crushing .emulsifying ,mixing stirring and dispersing can be accomplished within a short time.The area touching working material is made of stainless steel(steel SUS316L is used for pharmaceutical purpose .With inner surface polished.,the vacuum stirring equipment meets the need of hygiene and are manufactured in accordance with GMP standard,it is best for the production of ointment,cream,etc)